Know Your CNC Machine
Before It Fails.
Build a practical CNC monitoring prototype with temperature and vibration sensors, ESP32, MQTT, and the FAVORIOT platform. Turn machine signals into visible trends and timely alerts.
Explore the architecture ↓42.6°C
2.4 m/s²
The charts and readings are simulated for illustration, not live machine measurements.
From machine signals to meaningful action
Changes in temperature and vibration can signal abnormal machine conditions. A small sensor-based prototype helps operators observe those changes remotely and understand how monitoring could support maintenance decisions.
01 · Connect
Attach temperature and vibration sensors to an ESP32 and collect readings.
02 · See
Publish data over MQTT and display measurements and trends in FAVORIOT.
03 · Act
Configure threshold rules and send maintenance notifications when readings require attention.
How the CNC monitoring system works
This simplified architecture shows how readings travel from the machine to a dashboard and alert workflow.
Hardware checklist
- ESP32 development board
- ADXL345 accelerometer or appropriate vibration sensor
- DS18B20 temperature probe or compatible sensor
- Wi-Fi, power supply, wiring and safe mounting
MQTT reference
Broker: mqtt.favoriot.com
Ports: 1883 / 8883 (TLS)
Topic: {token}/v2/streams
Authentication: Device access token
Check the current FAVORIOT V2 documentation for credentials, topic format and payload requirements.
Build your first prototype
- Create a FAVORIOT account and register your device.
- Wire and mount the sensors safely on the CNC machine.
- Install sensor and MQTT libraries in Arduino IDE.
- Connect ESP32 to Wi-Fi and authenticate to the MQTT broker.
- Publish temperature and vibration readings at a suitable interval.
- Create charts, gauges and rules in FAVORIOT.
Illustrative telemetry payload
{
"device_developer_id": "YOUR_DEVICE_ID",
"data": {
"temperature": 42.6,
"vibration": 2.4
}
}
Example data only, not complete firmware. An accelerometer axis reading is not equivalent to a calibrated industrial vibration severity measure.
See abnormal readings. Alert the right people.
Temperature
Illustrative overheating rule: notify maintenance when temperature exceeds 70°C .
Vibration
Compare a calibrated vibration metric against a machine-specific baseline. A 10 m/s² threshold is illustrative only.
Notification
Use available FAVORIOT rule actions or a configured webhook to route events to email, Telegram or another approved service.
Start with one machine. Learn before scaling.
Historical trends
Compare behavior across operating periods to investigate recurring patterns.
Machine learning
Explore anomaly detection when enough representative data has been collected.
Industrial connectivity
Assess PLCs and industrial gateways while keeping approved machine controls local.
Make the Invisible Visible.
Use FAVORIOT to turn connected machine data into operational visibility. Begin with a small, measurable CNC monitoring pilot.
Explore FAVORIOT ↗